Tab-Ex® 03 D2 | Accessories
Bundle / Kits
Tab-Ex® 03 DZ2 / D2 with HART Communicator Kit
The Tab-Ex® 03 DZ2 and D2 with the VIATOR® Bluetooth® HART Interface is a fully-equipped HART communicator kit for Zone 2/22 and Division 2 hazardous areas. This kit includes everything you need for a full-featured, handheld HART communicator for hazardous areas.
Included with these hazardous-area HART communicator kits:
- Tab-Ex® 03 DZ2 / D2 with Bluetooth®, Android™, WiFi and/or WWAN, 4GB RAM, 64GB storage memory, 8" (20.32 cm) touch screen
- Optional: with external microSD up to 512 GB
- Complete HART DD Library
- Viator BT Bluetooth HART Modem
- Complete Kit is pre-installed for customer
- Out of box Experience (OOBE)
- DevCom Smart Device Communicator App available in App Library
Application
The Viator® Bluetooth® Interface is a point-to-point HART modem for temporary connection to HART field devices.
The modem is operated by replaceable AAA batteries and can operate for approximately 20 hours. It attaches to a HART field device with 18-inch leads and test clips. The Tab-Ex 03 uses an internal Bluetooth interface communicate with the modem.
Carrying
LC T03 X2
Leather Case for Tab-Ex® 01 / 02 / 03 DZ2 & D2.
When purchasing the leather case, a carrying strap (not cushioned) is included.
Approved for use in Zone 2/22 & DIV 2.
- Keep the Tab-Ex 03 D2 / DZ2 safe
- For use with protective case
- Adjustable Hand strap for left- and right-hands
- Carry strap (also usable for landscape viewing)
- Removable shoulder / neck strap (adjustable)
- Reinforced cover for use as a reliable tablet stand
- Concealable rear camera
CH T03 X2
Chest Harness for Tab-Ex® 01 / 02 / 03 DZ2 & D2.
- Keep the Tab-Ex 03 DZ2 / D2 save within Ex-area
- Enables hands-free operations
- Possible to attach the tablet to the body without the need to use a hand to hold it
- Climbing on rope or ladder without compromises
- Easy to fit the tablet in the chest harness
- Top-grain leather and cushioned shoulder harness
- Comfortable to wear whole shift / all day long
- Adjustable straps for different body sizes
- Usable with and without stylus holder
- Separate Stylus loop
- Camera aperture (can be closed)
HA T03 X2R
Hand Strap Rotating for Tab-Ex® 01 / 02 / 03 DZ2 & D2.
Approved for use in Zone 2/22 & DIV 2.
- Hold & Keep the Tab-Ex 03 D2/DZ2 save within Ex-area
- Rotatable Latch for one-hand operations (horizontal or vertical)
- Camera still usable
- For left- and right-hander
Carrying Strap (cushioned)
Cushioned and ergonomic shaped Carrying Strap.
For carrying the tablet, the strap must be combined with our compatible Leather Case. (LC T01 X1, LC T01 X2, LC TPRO X2 or LC T03 X2)
Charging
BP T03 X2
Spare Li-ion battery pack for Tab-Ex® 03 D2
TC S02
Charger with USB-A Socket & EU-, UK-, US-, AU-, CN-Adapter
Docking Stations
Lite Cradle
The Tab-Ex® 02 & 03 (DZ2 + D2) lite cradle is the ultimate choice for drivers who want to keep things simple. At just 0.5 lbs (0.2 kg), the cradle keeps your tablet safe and lets you access all the features you love about your tablet. The camera, stylus, and all your tablet ports can be used while it's safely docked in the cradle. If needed, you can even lock your cradle closed for extra tablet security.
Features
- Designed for the Tab-Ex® 02 & 03 (DZ2 + D2)
- Has cutouts for providing direct access to your camera, stylus, and USB port while your tablet is safely docked
- Cradle can be mounted using the VESA 75mm, M20 threads, and AMPS hole pattern to attach to a Gamber-Johnson system
- Cradle can be mounted on a flat vertical surface
- Dock design is compatible with Samsung’s built-in Near Field Communication (NFC); perform tasks with another NFD device without taking the tablet out of the dock
- Optional lock button for theft deterrence and extra tablet security
- Simple, one-handed cradle operation
- Composite design for reduced overall weight
- Includes USB car adaptor
- Compatible with Zirkona products
Certificates & Testing
- Vibration/Shock Testing: MIL-STD 810G
- CE, TÜV
- SAE Standard J1455 Crash Test
Dual USB Docking Station (Cigarette Lighter Connector)
This is the new improved Tab-Ex® 02 & 03 (DZ2 + D2) docking station with dual powered USBs and cigarette lighter connector. Each USB port will deliver 1.5A of power and has an integrated cable restraint system. The docking station is compact, lockable, and can be used with one hand. Easily connect this docking station to your vehicle with the cigarette lighter connector and this dock will provide power to your tablet's battery so it will stay charged and ready to go. (Not for use in hazardous locations)
Port Replication
- (2) USB 1.1 - each with 1.5A power
Features
- Designed for the Tab-Ex® 02 & 03 (DZ2 + D2)
- Dual powered USB ports; 1.5A for each port for connecting peripheral devices
- Access to all control buttons, camera, ports and stylus while the tablet is safely docked
- Simple, one-handed docking operation:
- Insert bottom of tablet into the docking station and push top of the tablet in until the lock engages
- Push latch button up with your thumb then remove the tablet from the docking station
- POGO pin connector and internal power supply provides power to charge the tablet while docked
- Push-button lock with key for theft deterrence
- VESA 75mm and AMPS mounting patterns; compatible with Zirkona mounting products
- Approximately 72" (182 cm) power cable with bare wire end
- Can be mounted on a flat vertical surface
- Composite design for reduced overall weight: 1,1 lbs (500 g)
Dual USB Docking Station (Bare Wire)
This is the new improved Tab-Ex® 02 & 03 (DZ2 + D2) docking station with dual powered USBs and bare wire connection. Each USB port will deliver 1.5A of power and has an integrated cable restraint system. The docking station is compact, lockable, and can be used with one hand. When wired to your vehicle, the station provides power to your tablet's battery so it will stay charged and ready to go. (Not for use in hazardous locations)
Port Replication
- (2) USB 1.1 (1.5A each)
Features
- Designed for the Tab-Ex® 02 & 03 (DZ2 + D2)
- Dual powered USB ports; 1.5A for each port for connecting peripheral devices
- Access to all control buttons, camera, ports and stylus while the tablet is safely docked
- Simple, one-handed cradle operation:
- Insert bottom of tablet into the docking station and push top of the tablet in until the lock engages
- Push latch button up with your thumb then remove the tablet from the docking station
- POGO pin connector and internal power supply provides power to charge the tablet while docked
- Push-button lock with key for theft deterrence
- VESA 75mm and AMPS mounting patterns; compatible with Zirkona mounting products
- Approximately 40” (101.6 cm) power cable with bare wire end
- Can be mounted on a flat vertical surface
- Composite design for reduced overall weight
DC T01 X2
Desktop Charger 5-Bay
for Tab-Ex® 01 D2, Z2, DZ2, Tab-Ex® 02 D2, DZ2, Tab-Ex® 03 D2/DZ2
- Space-saving countertop charging
- Five bays offering full power to Tab-Ex® POGO pins for maximum charging
- Store and charge 5 units of Tab-Ex® simultaneously
- Over-current / voltage and polarity protection to protect Tab-Ex®
- Including power supply with line cord
Mounting Solutions
Table Stand
The table stand is used for various smartphone and tablet mounting solutions (not included).
For use with (not included):
- Universal Tablet Holder for tablet Tab-Ex® 03 / 04 Pro.
- VH-C S03 Vehicle Holder for Smart-Ex® 03
The table stand has pre-drilled holes in the mounting plate. An extra heavy foot keeps the table stand in place.
- Height: 176 mm
- Width: 145 mm
- Depth: 150 mm
- Volume: 3828 cm³
- Weight: 592 g
Passive Holder with tilt swivel
Passive & adjustable holder with tilt swivel. Together with the Table Stand, it's an ideal addition for your desktop. For Tab-Ex® 03 DZ2/D2 and also suitable for vehicles with Brodit Mouting Systems.
Table Stand not included.
Standard Duty Pedestal Mount
Pedestal Mount 6,5" – with ball head and wingnut.
Compatible with Universal Tablet Holder (Tab-Ex 03 / 04 Pro) and the USB-C vehicle holder VH-C S03 (Smart-Ex 03).
A Standard Duty Pedestal Mount for a stable installation of your device in any vehicle and on any flat surface. Easy to set in any angle and position thanks to ball heads which tilt 210° and swivel 360°. AMPS holes, compatible with all Brodit holders with tilt swivel.
- Color: Black.
- Rod made of aluminum
- Wingnuts made of plastic.
- Mounting plate: 50x42 mm
- Total length: 165 mm
- Rod diameter: 23 mm
- Ball head: 20 mm
- Weight: 201 g
- Loading weight: 2 kg
- AMPS hole pattern: 4 mm
Standard Duty Pedestal Mount + Suction Cup
Pedestal Mount 7,5" with suction cup, ball head and wingnut. Suitable with Universal Tablet Holder (Tab-Ex 03 / 04 Pro) and the USB-C vehicle holder VH-C S03 (Smart-Ex 03). Also compatible with all Brodit holders with tilt swivel.
A Standard Duty Pedestal Mount with Suction Cup for a stable installation of your device in any vehicle on any smooth surface e.g. side window. Easy to set in any angle and position thanks to ball heads which tilt 210° and swivel 360°. AMPS holes, compatible with all Brodit holders with tilt swivel.
- Color: Black
- Rod made of aluminum
- Wingnuts made of plastic
- Mounting plate: 50x42 mm
- Total length: 190 mm
- Rod diameter: 23 mm
- Ball head: 20 mm
- Diameter suction cup: 90 mm
- Weight: 309 g
- Loading weight: 2 kg
- AMPS hole pattern: 4 mm
Adapters
Multiport Adapter EE-P5400
5-in-1 USB-C Multiport-Adapter for connecting the Tab-Ex® 03 with a compatible (HDMI-capable) display.
- USB Type-C plug
- Cable length 20 cm (7,87 inch)
- 1x HDMI-Output (up to 4K and 60 Hz)
- 1x USB Type-C for data transfer or fast charging (PD 3.0* compatible devices)
- 2x USB A 3.0 for data transfer
- 1x Gigabit Ethernet
* Requires the TC S02 charger and PC TPro cable (not included).
USB-C Multiport Adapter
3x USB-A, 2x USB-C, VGA, HDMI™, LAN
incl. charging function, USB-C Power Delivery, Plug & Play, compatible with Thunderbolt 3/4
Data sheet 
Datenblatt 
PSPA1C1GE-R
Rugged USB-C to Ethernet Adapter
for Tab-Ex® 02 / 03 / Pro (DZ2 / D2), and Pad-Ex® 01 (DZ2 / D2).
Note (Pad-Ex® 01 P8 only): Additional USB-A (plug) to USB-C (jack) adapter is necessary.
- Type-C USB-3.1 connection (up to 5Gb/s)
- Gigabit Ethernet RJ45 connection with link and speed LED’s
- USB Type C power delivery input up to 7.5W
- Engineered to 810G specifications
- 140g / 5oz
- Dimensions: 14.6 cm X 3.49 cm x 2.2 cm
CC S01-R
Car charger with USB-A Socket
Note: For the Smart-Ex 03, the PC TPRO (USB-C to USB-A cable, Art. No.: 70121989) is required.
PC TPRO
USB-C to USB-A data cable.
Various Accessory
RSM-HS 01-W
- Lightweight Zone 1 headset for RSM-Ex® series
- Based on Samsung EHS64AVFWE
MicroSD (512 GB)
Samsung MicroSD card – 512 GB
ST T03 X2
SAMSUNG S Pen
for Tab-Ex® 03 and Tab-Ex® 04 Pro Series
S Pen Tips & Tweezers
SAMSUNG S Pen
Tip Ends & Tip Removal Tweezers
for ST T03 X2
Stylus Tether ST01
Tether for Stylus Pen